mlpack  2.2.5
Density Estimation Tree (DET) tutorial


Author: Parikshit Ram

DETs perform the unsupervised task of density estimation using decision trees. Using a trained density estimation tree (DET), the density at any particular point can be estimated very quickly (O(log n) time, where n is the number of points the tree is built on).

The details of this work is presented in the following paper:

title={Density estimation trees},
author={Ram, P. and Gray, A.G.},
booktitle={Proceedings of the 17th ACM SIGKDD International Conference on
Knowledge Discovery and Data Mining},

mlpack provides:

Table of Contents

A list of all the sections this tutorial contains.

Command-Line mlpack_det

The command line arguments of this program can be viewed using the -h option:

$ mlpack_det -h
Density Estimation With Density Estimation Trees
This program performs a number of functions related to Density Estimation
Trees. The optimal Density Estimation Tree (DET) can be trained on a set of
data (specified by --training_file or -t) using cross-validation (with number
of folds specified by --folds). This trained density estimation tree may then
be saved to a model file with the --output_model_file (-M) option.
The variable importances of each dimension may be saved with the --vi_file
(-i) option, and the density estimates on each training point may be saved to
the file specified with the --training_set_estimates_file (-e) option.
This program also can provide density estimates for a set of test points,
specified in the --test_file (-T) file. The density estimation tree used for
this task will be the tree that was trained on the given training points, or a
tree stored in the file given with the --input_model_file (-m) parameter. The
density estimates for the test points may be saved into the file specified
with the --test_set_estimates_file (-E) option.
--folds (-f) [int] The number of folds of cross-validation to
perform for the estimation (0 is LOOCV) Default
value 10.
--help (-h) Default help info.
--info [string] Get help on a specific module or option.
Default value ''.
--input_model_file (-m) [string]
File containing already trained density
estimation tree. Default value ''.
--max_leaf_size (-L) [int] The maximum size of a leaf in the unpruned,
fully grown DET. Default value 10.
--min_leaf_size (-l) [int] The minimum size of a leaf in the unpruned,
fully grown DET. Default value 5.
--output_model_file (-M) [string]
File to save trained density estimation tree to.
Default value ''.
--test_file (-T) [string] A set of test points to estimate the density of.
Default value ''.
--test_set_estimates_file (-E) [string]
The file in which to output the estimates on the
test set from the final optimally pruned tree.
Default value ''.
--training_file (-t) [string]
The data set on which to build a density
estimation tree. Default value ''.
--training_set_estimates_file (-e) [string]
The file in which to output the density
estimates on the training set from the final
optimally pruned tree. Default value ''.
--verbose (-v) Display informational messages and the full list
of parameters and timers at the end of
--version (-V) Display the version of mlpack.
--vi_file (-i) [string] The file to output the variable importance
values for each feature. Default value ''.
For further information, including relevant papers, citations, and theory,
consult the documentation found at or included with your
distribution of mlpack.

Plain-vanilla density estimation

We can just train a DET on the provided data set S. Like all datasets mlpack uses, the data should be row-major (mlpack transposes data when it is loaded; internally, the data is column-major – see this page for more information).

$ mlpack_det -t dataset.csv -v

By default, mlpack_det performs 10-fold cross-validation (using the $\alpha$-pruning regularization for decision trees). To perform LOOCV (leave-one-out cross-validation), which can provide better results but will take longer, use the following command:

$ mlpack_det -t dataset.csv -f 0 -v

To perform k-fold crossvalidation, use -f k (or –folds k). There are certain other options available for training. For example, in the construction of the initial tree, you can specify the maximum and minimum leaf sizes. By default, they are 10 and 5 respectively; you can set them using the -M (–max_leaf_size) and the -N (–min_leaf_size) options.

$ mlpack_det -t dataset.csv -M 20 -N 10

In case you want to output the density estimates at the points in the training set, use the -e (–training_set_estimates_file) option to specify the output file to which the estimates will be saved. The first line in density_estimates.txt will correspond to the density at the first point in the training set.

$ mlpack_det -t dataset.csv -e density_estimates.txt -v

Estimation on a test set

Often, it is useful to train a density estimation tree on a training set and then obtain density estimates from the learned estimator for a separate set of test points. The -T (–test_file) option allows specification of a set of test points, and the -E (–test_set_estimates_file) option allows specification of the file into which the test set estimates are saved.

$ mlpack_det -t dataset.csv -T test_points.csv -E test_density_estimates.txt -v

Computing the variable importance

The variable importance (with respect to density estimation) of the different features in the data set can be obtained by using the -i (–vi_file ) option. This outputs the absolute (as opposed to relative) variable importance of the all the features into the specified file.

$ mlpack_det -t dataset.csv -i variable_importance.txt -v

Saving trained DETs

The mlpack_det program is capable of saving a trained DET to a file for later usage. The –output_model_file or -M option allows specification of the file to save to. In the example below, a DET trained on dataset.csv is saved to the file det.xml.

$ mlpack_det -t dataset.csv -M det.xml -v

Loading trained DETs

A saved DET can be used to perform any of the functionality in the examples above. A saved DET is loaded with the –input_model_file or -m option. The example below loads a saved DET from det.xml and outputs density estimates on the dataset test_dataset.csv into the file estimates.csv.

$ mlpack_det -m det.xml -T test_dataset.csv -E estimates.csv -v

The 'DTree' class

This class implements density estimation trees. Below is a simple example which initializes a density estimation tree.

using namespace mlpack::det;
// The dataset matrix, on which to learn the density estimation tree.
extern arma::Mat<float> data;
// Initialize the tree. This function also creates and saves the bounding box
// of the data. Note that it does not actually build the tree.
DTree<> det(data);

Public Functions

The function Grow() greedily grows the tree, adding new points to the tree. Note that the points in the dataset will be reordered. This should only be run on a tree which has not already been built. In general, it is more useful to use the Trainer() function found in 'namespace mlpack::det'.

// This keeps track of the data during the shuffle that occurs while growing the
// tree.
arma::Col<size_t> oldFromNew(data.n_cols);
for (size_t i = 0; i < data.n_cols; i++)
oldFromNew[i] = i;
// This function grows the tree down to the leaves. It returns the current
// minimum value of the regularization parameter alpha.
size_t maxLeafSize = 10;
size_t minLeafSize = 5;
double alpha = det.Grow(data, oldFromNew, false, maxLeafSize, minLeafSize);

Note that the alternate volume regularization should not be used (see ticket #238).

To estimate the density at a given query point, use the following code.

// For a given query, you can obtain the density estimate.
extern arma::Col<float> query;
extern DTree* det;
double estimate = det->ComputeValue(&query);

Computing the variable importance of each feature for the given DET.

// The data matrix and density estimation tree.
extern arma::mat data;
extern DTree* det;
// The variable importances will be saved into this vector.
arma::Col<double> varImps;
// You can obtain the variable importance from the current tree.

'namespace mlpack::det'

The functions in this namespace allows the user to perform tasks with the 'DTree' class. Most importantly, the Trainer() method allows the full training of a density estimation tree with cross-validation. There are also utility functions which allow printing of leaf membership and variable importance.

Utility Functions

The code below details how to train a density estimation tree with cross-validation.

using namespace mlpack::det;
// The dataset matrix, on which to learn the density estimation tree.
extern arma::Mat<float> data;
// The number of folds for cross-validation.
const size_t folds = 10; // Set folds = 0 for LOOCV.
const size_t maxLeafSize = 10;
const size_t minLeafSize = 5;
// Train the density estimation tree with cross-validation.
DTree<>* dtree_opt = Trainer(data, folds, false, maxLeafSize, minLeafSize);

Note that the alternate volume regularization should be set to false because it has known bugs (see #238).

To print the class membership of leaves in the tree into a file, see the following code.

extern arma::Mat<size_t> labels;
extern DTree* det;
const size_t numClasses = 3; // The number of classes must be known.
extern string leafClassMembershipFile;
PrintLeafMembership(det, data, labels, numClasses, leafClassMembershipFile);

Note that you can find the number of classes with max(labels) + 1. The variable importance can also be printed to a file in a similar manner.

extern DTree* det;
extern string variableImportanceFile;
const size_t numFeatures = data.n_rows;
PrintVariableImportance(det, numFeatures, variableImportanceFile);

Further Documentation

For further documentation on the DTree class, consult the complete API documentation.